Germany Schnier High Voltage Switch HES 08/01
100KV/1mA, 2 com/1 nc/1 no.

The high voltage switch HES 08/01 can be used as a high voltage relay or grounding switch. Control voltage is 24VDC, high voltage 100 kV.

Intended Use:
The HES 08/01 high voltage switch is only intended for use in stationary electrostatic equipment that complies with at least one of the following standard safety requirements.
EN 50176 "Stationary electrostatic application equipment for flammable liquid coatings"
EN 50348 "Stationary electrostatic application equipment for non-flammable liquid coatings"
EN 50177 "Stationary electrostatic spraying equipment for flammable liquid coatings"
EN 50223 "Stationary electrostatic application equipment for flammable flock materials".

The high voltage switch mainly consists of a high voltage switching element operating in insulating oil, an electromechanical actuator, and a terminal box. The housing is cast from robust insulating resin, and the high voltage connection is designed for dry installation of high voltage cables. The design of the high voltage switch allows it to function as an opener, closer, changer, or grounding switch (see connection examples).

Only damped high voltage cables are permitted for use as grounding switches, e.g., SCHNIER code: 050028 or 050029 as grounding wires.
Grounding wires should use damped high voltage cables at least 2m long.
The common switch contact is designed as a double contact for connecting detection or discharge resistors.

Specifications
Max switching voltage 100 kV DC/
Min detection voltage 1000V DC
Operating current 1mA
Control voltage 24VDC
Enable current/Holding current Typical: 500 mA for 0.5 sec/ Typical: 150 mA
Operating environment +5°C to 40°C max. 80% r.h.
Dimensions L / ? 330 / 170 or 190 mm
Weight 6800g
Protection type Drift-proof
Construction Cylindrical, cast, filled with insulating oil